Loading ...
Loading ...
Loading ...
EN
12
Caution
1. Use a dry cloth to clean the main unit’s sensors, infrared sensors and charging contacts. Do not use a wet cloth to prevent water from entering the appliance and causing damage.
2. To avoid scratching yourself, be careful when using a screwdriver to replace the replacement parts.
Clean the dust collector
Step 1: Replace the dust bag
When the dust bag is full, the dust full indicator on the LED display of the dust collector becomes constant on, replace the dust bag. It is recommended to replace the dust bag every 6-8 weeks.
Open the cover of the dust
collector
Pull the dust bag handle up to
remove the dust bag
Dispose of the used dust bag
Replace with a new dust bag Close the cover of the dust
collector
Step 3: Clean the filter screen
Wash the dust box filter with clean water and use it after drying to prevent dust clumping when used again.
Step 1: Clean the sensor on the host
Wipe and clean all visible sensors of the host machine with a soft and clean cloth;
Parts cleaning
Step 2: Clean the universal wheel
The turning machine pulls out the universal wheel upward, cleans the hair and dirt on the wheel
body and axle, and the universal wheel can be washed, dried and reinstalled;
Loading ...
Loading ...
Loading ...