Loading ...
Loading ...
Loading ...
Eaton Tripp Lite SmartOnline Series User Guide 614-40204—Rev 01 23
Internal power supply External power supply
1 3 1 3 1 31 3
Normally closed Normally open Normally closed Normally open
Terminal wire size rating is 0.32-4 mm2 (22-12 AWG).
Suggested wire size is 0.82 mm2 (18 AWG).
Remote control connection and test
1. Verify that the UPS is shut down and that the mains electrical input is disconnected from the UPS.
2. Remove the RPO connector from the UPS by loosening the screws.
3. Connect a normally closed volt-free contact between the two pins of the connector.
1 3
Normally closed
Contact open: shut down of UPS
To return to normal operation, deactivate the external remote shut down
contact and restart the UPS from the front panel.
4. Plug the RPO connector into the back of the UPS and tighten the screws.
5. Connect and restart the UPS according to the previously-described procedures.
6. Activate the external remote shutdown contact to test the function. Always test the RPO function before
applying your critical load to avoid an accidental load loss.
Connectivity Cards
Connectivity cards allow the UPS to communicate in a variety of networking environments and with different
types of devices. The SmartOnline models have one open communication bay for the WEBCARDLXE network
card, which provides monitoring and control using an SNMP network management platform, web browser,
SSH, or Telnet.
UPS Remote Control Functions
Loading ...
Loading ...
Loading ...