Loading ...
Loading ...
Loading ...
19
HEART RATE MEASUREMENT
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SUGGESTED ACTION
Treadmill will not start
Not plugged in. Plug cord into outlet.
Safety Key is not inserted. Insert Safety Key.
Running belt not centered
Running belt tension is not
correct on the left or right
sides of the running board.
Tighten the left and right
adjusting bolts of the rear roller.
(See page 7 for instructions)
Computer not working
Wires from the console
and
bottom control board
and not properly
connected.
Check wire connections from the
console to the control board.
Transformer is damaged.
If the transformer is damaged,
contact customer service.
E01 or E13: Message
failure
Wires from the console
and
bottom control board
are not properly
connected.
Check wire connections from the
console to the control board. If
the wire has been punctured or
damaged, you will need to
replace it. If the problem is not
rectified, you may need to
replace the control board.
It is dangerous to measure heart rate
while you are running. Only measure
heart rate when you stop running.
Softly press Infrared Heart Rate
Sensor (No. G01) to measure your
heart rate.
Do not move your fi
nger until the
pulse value stops flashing.
This
data is for reference only. It
cannot be used for medical purposes.
Loading ...
Loading ...
Loading ...