Dji MINI 2 SE User Manual

Loading ...

DJI MINI 2 SE User Manual

Updating Firmware

When you connect the aircraft or remote controller to DJI Fly, you will be notied if a new rmware update

is available. To update, connect the mobile device to the internet and follow the on-screen instructions.

Note that the rmware cannot be updated if the remote controller is not linked to the aircraft.

Make sure to follow all the steps to update rmware. Otherwise, the update may fail. The aircraft will

power o automatically after the rmware update is complete.

The rmware update will take approx. 10 minutes. It is normal for the gimbal to go limp, aircraft

status indicators to blink, and the aircraft to reboot. Wait patiently until the update is complete.

Before performing an update, make sure the Intelligent Flight Battery is at least 15% charged and the

remote controller is at least 20% charged.

The remote controller may become unlinked from the aircraft after updating. Relink the remote

controller and aircraft. Note that the update may reset various main controller settings, such as the

RTH altitude and the maximum ight distance, to default settings. Before updating, take note of your

preferred DJI Fly settings and readjust them after the update.

After-Sales Information

Visit https://www.dji.com/support to learn more about after-sales service policies, repair services, and

support.

Maintenance Instructions

To avoid serious injury to children and animals, observe the following rule:

1. Small parts, such as cables and straps, are dangerous if swallowed. Keep all parts out of reach of

children and animals.

2. Store the Intelligent Flight Battery and remote controller in a cool, dry place away from direct sunlight

to ensure the built-in LiPo battery does NOT overheat. Recommended storage temperature:

between 22° and 28° C (71° and 82° F) for storage periods of more than three months. Never store

in environments outside the temperature range of -10° to 45° C (14° to 113° F).

3. DO NOT allow the camera to come into contact with or become immersed in water or other liquids.

If it gets wet, wipe it with a dry soft, absorbent cloth. Turning on an aircraft that has fallen into water

may cause permanent component damage. DO NOT use substances containing alcohol, benzene,

thinners or other ammable substances to clean or maintain the camera. DO NOT store the camera

in humid or dusty areas.

4. DO NOT connect this product to any USB interface that is older than version 3.0. DO NOT connect

this product to any "power USB" or similar devices.

5. Check every part of the aircraft after any crash or violent impact. If you have any problems or

questions, please contact a DJI authorized dealer.

6. Regularly check the Battery Level Indicators to see the current battery level and overall battery life.

The battery is rated for 200 cycles. It is not recommended to continue use afterward.

Loading ...

Dji MINI 2 SE