Dji MINI 2 SE User Manual

Loading ...

DJI MINI 2 SE User Manual

A gimbal motor error may occur in the following situations: a. The aircraft is on uneven ground or the

gimbal is obstructed. b. The gimbal experiences excessive external force, such as during a collision.

DO NOT apply external force to the gimbal after the gimbal is powered on. DO NOT add any extra

payload to the gimbal as this may cause the gimbal to function abnormally or even lead to permanent

motor damage.

Make sure to remove the gimbal protector before powering on the aircraft. Also, make sure to mount

the gimbal protector when the aircraft is not in use.

Flying in heavy fog or clouds may make the gimbal wet, leading to temporary failure. The gimbal

recovers full functionality once it is dry.

Camera Prole

DJI Mini 2 SE uses a 1/2.3" CMOS sensor camera, which can shoot up to 2.7K video and 12MP

photos, and supports shooting modes such as Single, AEB, Timed Shot, and Panorama.

The aperture of the camera is F2.8 and can shoot at 1 m to innity.

Make sure the temperature and humidity is suitable for the camera during usage and storage.

Use a lens cleanser to clean the lens to avoid damage.

DO NOT block any ventilation holes on the camera as the heat generated may damage the device

and hurt the user.

Storing Photos and Videos

DJI Mini 2 SE supports the use of a microSD card to store your photos and videos. A UHS-I Speed

Grade 3 rating or above microSD card is required due to the fast read and write speeds necessary for

high-resolution video data. Refer to the Specications section for more information about recommended

microSD cards.

Without a microSD card inserted, users can still capture single photos or record 720p normal videos.

The le will be directly stored on the mobile device.

Do not remove the microSD card from the aircraft while it is powered on. Otherwise, the microSD

card may be damaged.

To ensure the stability of the camera system, single video recordings are limited to 30 minutes.

Check camera settings before use to make sure the congurations are correct.

Before shooting important photos or videos, shoot a few images to test the camera is operating

correctly.

Photos or videos cannot be transmitted from the microSD card in the aircraft using DJI Fly if the

aircraft is powered o.

Make sure to power o the aircraft correctly. Otherwise, the camera parameters will not be saved

and any recorded videos may be damaged. DJI is not responsible for any failure of an image or video

to be recorded or having been recorded in a way that is not machine-readable.

Download Photos and Videos

1. Make sure that the aircraft is connected to the mobile device via the remote controller and taht the

motors have not started.

2. Launch DJI Fly, enter playback, and tap

in the upper left corner to access the les to download.

Loading ...

Dji MINI 2 SE