Loading ...
Loading ...
Loading ...
©
2023 DJI All Rights Reserved.
23
DJI MINI 2 SE User Manual
Charging the Battery
Fully charge the Intelligent Flight Battery before each flight. It is recommended to use the charging
devices provided by DJI, such as the DJI Mini 2 SE Two-way Charging Hub, DJI 30W USB-C Charger,
or other USB Power Delivery chargers.
1. Connect the USB charger to an AC power supply (100-240V, 50/60 Hz). Use a power adapter if
necessary.
2. Attach the aircraft to the USB charger.
3. The battery level LEDs display the current battery level during charging.
4. The Intelligent Flight Battery is fully charged when all the battery level LEDs are on. Detach the USB
charger when the battery is fully charged.
In cold environments, insert the battery into the battery compartment and turn on the aircraft to
warm up before taking o.
The battery cannot be charged if the aircraft is powered on.
DO NOT charge an Intelligent Flight Battery immediately after ight as the temperature may be too
high. Wait until it cools down to room temperature before charging again.
The charger stops charging the battery if the battery cell temperature is not within the operating
range of 5° to 40° C (41° to 104° F). The ideal charging temperature is 22° to 28° C (71.6° to 82.4° F).
Fully charge the battery at least once every three months to maintain battery health.
It is recommended to use a QC2.0 or PD2.0 USB charger to charge. DJI does not take any
responsibility for damage caused by using a charger that does not that meet the specied
requirements.
When using the DJI 18W USB charger, the charging time is approximately 1 hour and 22 minutes.
It is recommended to discharge the Intelligent Flight Batteries to 30% or lower during transport or
storage. This can be done by ying the aircraft outdoors until the battery level is less than 30%.
The Battery Charging Hub can charge up to three batteries. Visit the ocial DJI Online Store for more
information about the Battery Charging Hub.
Loading ...
Loading ...
Loading ...