Loading ...
Loading ...
Loading ...
Nozzle
attached to
"inflation"
outlet
3. Insert nozzle into inflatable and
then start inflator, see How to
Start paragraph.
NOTE: If inflatable is not getting
firm enough, place thumb over the
"deflation" outlet to allow air to go
directly into the inflatable.
How to Inflate Tires
1. Press female tire chuck onto valve
stem.
Risk of Flying
Objects/Bursting
Objects. Over inflating tire could
cause the tire to burst or the
universal valve adapter to pop
off the valve stem and become a
projectile. Use a tire pressure gauge
to ensure an accurate tire pressure
reading, because the pressure
gauge on the unit is for general
reference only.
2. See How to Start instructions to
start inflator.
How to inflate Sport Balls
Risk of Bursting.
Most sports bails
with no initial air will fill in less
than 10 seconds. Watch sport balls
carefully while filling, do not overfill.
1. Insert inflator needle into sport ball
to be inflated.
2. Place On/Off switch in the "ON"
position. When sport ball is firm
place On/Off switch in the "OFF"
position. IMPORTANT: Most
sports balls with no initial air will
fill in less than 10 seconds.
NOTE: When the unit has been turned
off, it is normal to hear a short hiss of
air being released.
Bow to Stop
1. Set the Off/Auto switch to "OFF"
Risk of Bursting.
DO NOT over-
inflate. Keeping thumb over
"Deflation" outlet could cause
inflatable to over-inflate. Use
caution when placing thumb over
"Deflation" outlet.
IMPORTANT: While inflating objects
the pressure gauge will not read
correctly. Sometimes the gauge will
read very high. Turn the unit "off"
and allow the needle to settle, this
will provide an approximate reading.
Stop and check the pressure read-
ing frequently when inflating.
Before Each Start-Up
Do not operate this
unit until you read
and understand this instruction
manual for safety, operation and
maintenance instructions.
1. Place Off/Auto switch to "OFF"
and close air regulator.
2. Turn the regulator knob counter-
clockwise until it stops.
3. Plug the power cord into the cor-
rect branch circuit receptacle.
(Refer to Voltage and Circuit
Protection paragraph in the
Installation section of this manual.
4. Attach hose and accessories.
14- ENG
Loading ...
Loading ...
Loading ...