Loading ...
Loading ...
Loading ...
49-85220-2
27
Maintenance (Cont.)
CARE AND CLEANING: Maintenance
Removing the Door:
1. Fully open the oven door.
2. On each hinge, slide the hinge lock up, making sure it
snaps into its fully raised position.
3. Firmly grasp both sides of the door near the handle.
4. Close the door until the top of the door is
approximately 3” from the range frame.
/LIWGRRUXSDQGDZD\IURPWKHUDQJHXQWLOERWKKLQJH
arms are clear of the slots in the range frame.
Replacing the Door:
1. Firmly grasp both sides of the door near the handle.
:LWKWKHGRRUDWWKHVDPHDQJOHDVWKHUHPRYDO
position, rest the notch in the bottom of the left hinge
arm on the bottom edge of the left hinge slot. The
notch in the hinge arm must be fully seated onto the
bottom of the slot. Repeat for the right side.
3. Fully open the door. If the door will not fully open, the
KLQJHDUPVDUHQRWVHDWHGFRUUHFWO\/LIWWKHGRRURII
the range and repeat Step 2.
4. Push the hinge locks down to the locked position.
&ORVHWKHRYHQGRRU
Pull hinge locks up to unlock
Notch
Push hinge locks down to lock
Removal position
Lift-Off Oven Door
The door is very heavy. Be careful when removing and lifting the door. Do not lift the door by the handle.
WARNING
If improperly removed, oven door hinges may suddenly close and can cause personal injury to
appendages near the hinge. Follow instructions below to avoid a risk of injury when removing and
re-installing the oven door.
Loading ...
Loading ...
Loading ...