Loading ...
Loading ...
Loading ...
5
2. PROJECT FEATURES
2.1 Home screen Router
Home screen (Router 1-8)
Philosophy: The main screen is called “Home” and gives the most important information about all the
incoming signals (on top of the screen), its routing(s) to DSP output modules (on the right of the screen),
mutes, levels, limits and delays.
The output DSP modules have easy to understand common labels (cannot be edited by the user) like “Main
L”, “Side L”, “Fill Front”, “Fill Center”, “Sub 1” and so on.
Output Delay: For each DSP output you can set a delay by double clicking the parameter. The maximum is
500ms. You can type in the delay in the “home” screen or in the DSP module screen.
Note: If you need more delay, use the “Delay L/R” or “AUX” DSP modules in “Router 9-16” section
Router: The router in the center of the screen allows to assign each input channel to one or several DSP
modules individually. For each connection you can adjust the level from 0dB to negative values by double
clicking the parameter.
Note: You can assign at the same time several inputs to a DSP module (Desk A, B, C, D and so on) please be
aware the more inputs are routed (X) and connected, the more noise occurs on the output! We recommend
using the “Group Mute” button to mute the not (yet) needed inputs or de-select them in the matrix!
Mutes: The mute bottoms on the left will mute the complete signal paths (all signals from input section) to
its DSP module on the right.
Loading ...
Loading ...
Loading ...