Loading ...
Loading ...
Loading ...
4
1. GENERAL INFORMATIONS
Before you start working with the Solaro Console software and your DX 1616 processor, visit RCF’s website
on www.rcf.it to check and download the DX 1616 project files (.pjxml files) available.
IMPORTANT NOTE: This manual only describes the characteristics of the DX1616_CR_V1_4 project files. For
more information about using the Solaro Console and Control software, installations, network
configurations and customization of the Control interface, please see the respective manuals.
1.1 GETTING STARTED
After connecting the device to our Solaro Console software we’ll access to the Network view as follow:
C
licking on “Open Device” button
we access at all the modules and
parameters of this project to
manage our audio system. (See
figure 2). Notice that in this way we
can control the modules without
the possibility to save or load any
preset.
Figure 1: Network View
To
do it we have to
load the
project.pjxml file;
File>Open
Project… and then
we have to “Map
Physical Device”, I
this case our DX
1616 processor.
Now our project is
matched to the
device and we can
access at the load
and save
Figure 2: Mapping Devices
p
reset functions. See the “EXAMPLE” chapter.
Loading ...
Loading ...
Loading ...