Loading ...
Loading ...
Loading ...
21
Figure 28: Control App re-syncing process
Usually the computer’s network adapter automatically reconnects to the network and it takes up to 30
seconds to re-sync Solaro Control App.
Note: When the Solaro Control on the remote computer is not available, you can have access to DX1616 with
the host computer and Solaro Console software instead: Just double click in the “Project View” the “Control”
icon. Please see chapter “SolaroConsole – without Solaro Control App in combination with a project (*.pjxml)
file” for more information.
Can I operate the DX1616 with Solaro Control App only?
Yes! As soon a project file is loaded to DX1616 and all devices (DX1616, Control Panel) are mapped before,
you can just launch Solaro Control App and operate DX1616.
Note: This works because the Mac Address and IP Address is part of the project file. Make sure, that you are
still working in the same network.
Note: While operating DX1616 with Solaro Control App only, please be aware that you are not able to save
your settings to a project file! You can do it later on with Solaro Console, because your last settings will be
kept in DX1616 even if power is switched off.
To safe settings in DX1616 to a project file, please have a look in the chapter”Which are the “sync” options
when connecting to DX1616?” and “Sync from DX1616 to PC”
Loading ...
Loading ...
Loading ...