Loading ...
Loading ...
Loading ...
19
3. FAQs
Which are the “sync” options when connecting to DX1616?
Sync from PC to DX1616
To sync from PC to DX1616 means that you want to transfer settings from your project file (offline) to DX1616:
(a) Click the red “Load Design To Device” button at the top of the Project View / Design Mode work area
page – as shown below (not visible if a network interface is not detected – you are working Offline)
Figure 24: “Load Design to Devices” button
(b) You will be asked if you want to load the settings to the DX1616 (“device”).
“Yes”: when want you load this project file settings to the DX1616 you have to confirm with “yes”.
Sync from DX1616 to PC
You want to connect to DX1616 (switch online), but you want to use the current settings which are in DX1616:
(a) Click the red “Load Design To Device” button at the top of the Project View / Design Mode work area
page – as shown below (not visible if a network interface is not detected – you are working Offline)
(b) You will be asked if you want to load the settings to the DX1616 (“device”).
“No”: Select “No” if you want to switch to Online Mode and still want to use the current parameter settings
in DX1616.
Figure 25: Syncing from PC to DX1616
Loading ...
Loading ...
Loading ...