Loading ...
Loading ...
Loading ...
10
FINAL INSTALLATION
1. Loosen all four mounting bracket screws (M), then
completely remove two mounting bracket screws (M)
from opposite sides of the mounting bracket (A).
Slide the canopy (B) over the mounting bracket (A),
aligning the slotted holes in the canopy (B) with the
pre-loosened mounting bracket screws (M) in the
mounting bracket (A). Twist the canopy (B) clockwise
to lock. Then re-insert the mounting bracket screws (M)
and securely tighten all screws.
2. Insert blade (J) through slot in the side of the motor
assembly (C), ensuring the “THIS SIDE UP” label faces
the ceiling. Align the holes of one blade (J) with three
blade screw holes in underside of the motor assembly
(C). Secure blade (J) with three blade screws (BB) and
blade washers (CC).
Repeat for the remaining blades (J).
Hardware Used
BB
Blade Screw x 9
CC
Blade Washer x 9
3. Remove one of the light pan screws (K) from the tter
plate (D) and save. Then, insert the wires from the
center of the tter plate (D) through the hole in the
light pan (F). Align the light pan (F) over the previously
loosened light pan screws (K), then place the keyholes
of the light pan (F) clockwise. Secure the light pan
(F) with the previously removed light pan screw (K).
Tighten all four light pan screws (K).
1
2
J
M
A
B
BB
CC
M
3
D
F
K
C
Loading ...
Loading ...
Loading ...