Loading ...
Loading ...
Loading ...
Portable Air Conditioner Water Drainage Method 23
When there is excess water condensation inside the unit, the appliance stops running and
shows symbol (“Full Tank” as mentioned in the “Self-Diagnosis” section of this manual
[p. 14]). This indicates that the water condensation needs to be drained through the
following procedures:
Water may need to be drained in high
humidity areas.
1. Unplug the unit from the power source.
2. Place a drain pan under the lower drain
plug (
Fig. 18).
3. Remove the lower drain plug.
4. Water will drain out and collect in the
drain pan. (The user may have to provide
his/her own drain pan as it may not be
included in the box).
5. After the water is drained, replace
the lower drain plug rmly.
6. Turn on the unit.
While using the unit in “Dehumidier” mode,
continuous drainage is recommended.
1. Unplug the unit from the power source.
2. Remove the drain plug. While doing this
operation, some residual water may spill
so please have a pan ready to collect
the water.
3. Connect the Drain Hose (½" or 12.7 mm,
may not be supplied) (
Fig. 19).
4. The water can be drained continuously
through the Hose into a oor drain or
bucket.
5. Turn on the unit.
MANUAL DRAINING (
FIG. 18)
CONTINUOUS DRAINING ( FIG. 19)
NOTE: Please make sure
that the height and section
of the Drain Hose is not
higher than the Drain
Outlet. If higher, draining
of the water tank may
not be successful
(
Fig. 20 and
Fig. 21).
Fig. 18
Fig. 19
Fig. 20 Fig. 21
Drain Outlet
Drain Outlet
Drain Cap
Drain Cap
Drain
Hose
Water Drainage Method
Loading ...
Loading ...
Loading ...