Loading ...
Loading ...
Loading ...
12 Operating Instructions Portable Air Conditioner
Ideal for hot and muggy weather when you
need to cool and dehumidify the room.
To Set This Mode Correctly:
1. Press the button a few times until the
“Cool” symbol appears.
2. Select the target temperature 64—90°F
(18—32°C) by pressing the or
button until the corresponding
value is displayed.
3. Select the required fan speed by pressing
the button. Three speeds are available:
High / Low / Auto.
*This means only the heat pump model
has “Heat” mode
.
To Set This Mode Correctly:
1. Press the button a few times
until the “Heat” symbol appears.
2. Select the target temperature 55—81°F
(13—27°C) by pressing the or
button until the corresponding
value is displayed.
3. Select the required fan speed by pressing
the button. Three speeds are available:
High / Low / Auto.
4. Water is removed from the air and
collected in the tank.
5. When the tank is full, the appliance shuts
down and the symbol appears on the
display. The tank cap must be extracted
and emptied. Drain off all the water left
into a basin. When all the water has been
drained, put the cap back in place.
6. When the tank has been emptied,
the appliance will start up again.
COOL MODE
HEAT MODE*
The most suitable temperature for rooms
during the summer varies from 75°F to81°F
(24°C to 27°C). You are recommended,
to not to set the temperature way below
the outdoor temperature. The fan speed
difference is more noticeable when the
appliance is in “Fan” mode, but may not be
as noticeable in “Cool” mode.
VRM050518N / VRM050520N
Plug the appliance to the main socket.
The appliance will be on “Standby” mode.
Press the button to turn the appliance on.
The last function that was active when the appliance
was last turned off will automatically be applied.
TURNING THE APPLIANCE ON
Loading ...
Loading ...
Loading ...