Loading ...
Loading ...
Loading ...
en Hood connection
50
Connecting via your home network
You require a router that has WPS functionality.
Access to your router is required. If you do not have
this, follow the steps listed under "Direct connection".
When you begin, make sure that the extractor hood is
connected to the same home network.
1. Open the basic settings using the f touch key.
2. Touch the "Hood control" setting.
3. Touch "Connect to network".
4. Press the WPS button on the router within the next
2 minutes.
A message will be displayed to notify you when the
hob is successfully connected to your home
network.
5. You have 2 minutes to initiate the connection
process on the extractor hood.
A message will be displayed to notify you when the hob
is successfully connected to the extractor hood. The
symbols for the hood controls on the hob are displayed
in the settings area.
Note:
Connection can only be established when both
appliances are connected to your home network and
the connection process has been initiated for both of
them. If the time allowed for connecting has already
expired for one of the two appliances, initiate the
connection process again.
Disconnecting from the network
Di sconnect i ng from the net wor k
You can reset the connections you have saved for your
home network and extractor hood at any time.
1. Open the basic settings using the f touch key.
2. Touch the "Hood control" setting.
3. Touch "Disconnect".
The connection has been restored.
Control the hood via the hob
In the basic settings of your hob you can adjust the
behaviour of your extractor hood depending on the
switch-on/off of the hob or individual cooking zones.
~ "Hood control settings" on page 51
You can select other settings using the control panel.
Setting the fan
Activation
1. Touch the : symbol in the status bar.
The preset fan setting will be shown on the display.
2. Select the fan setting you require.
Touch C or D to select one of the
intensive modes.
The fan has been activated.
Deactivating
1. Touch the : symbol in the status bar.
2. Select fan setting 0.
The fan has been deactivated.
Setting automatic mode
Activation
1. Touch the : symbol in the status bar.
2. Select auto >.
Automatic mode is activated.
The fan starts automatically when steam is produced.
Deactivating
1. Touch the : symbol in the status bar.
2. Select auto >.
Automatic mode is deactivated.
Setting the hood lighting
You can switch the hood light on and off via the hob's
control panel.
Touch the < symbol in the status bar.
Loading ...
Loading ...
Loading ...