Bosch PXY601JW1E/14 Serie 8 Induction cooktop

Instruction manual - Page 46

For PXY601JW1E/14. Series: Serie 8
Also, The document are for others Bosch models: PXY*J*

PDF File Manual, 60 pages, Read Online | Download pdf file

PXY601JW1E/14 photo
Loading ...
Loading ...
Loading ...
en Home Connect
46
Wi-Fi symbols
The Wi-Fi indicator on the main control panel changes
depending on the status and quality of the connection
and the availability of the Home Connect server.
You can call up a description of the symbol being
displayed. To do this, touch and hold the symbol for at
least 2 seconds, or until the description appears.
Deactivating Wi-Fi
If Wi-Fi has been activated, you can use the Home
Connect functions.
Note:
In networked standby mode, your appliance requires a
maximum of 2 W.
1. Open the basic settings using the f touch key.
2. Touch the "Home Connect" setting.
3. Touch "Wi-Fi".
4. Touch "Switched off".
This deactivates Wi-Fi; the D symbol will go out on the
control panel.
Disconnecting from the network
Di sc onnect i ng from the net wor k
You can disconnect your hob from the network at any
time.
Note:
If your hob is disconnected from the network, it is not
possible to operate it using Home Connect.
1. Open the basic settings using the f touch key.
2. Touch the "Home Connect" setting.
3. Touch "Disconnect".
4. Touch "Next" to confirm.
This disconnects the appliance from your home
network; the D symbol will go out on the control panel.
Note:
The network connection will also be deleted if you
restore the factory settings on your appliance.
Connecting to the network
Connect i ng to the net wor k
1. Open the basic settings using the f touch key.
2. Touch the "Home Connect" setting.
3. Touch "Use wizard to configure settings" to launch
the Home Connect assistant.
4. Follow the instructions as per ~ "Automatic
registration in the home network" or ~ "Manual
registration in the home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
The appliance must be connected to the network.
The app must be open and be set up.
If your extractor hood is directly connected, first
disconnect the hob from your home network and
then initiate the connection process
again.~ "Disconnecting from the network"
on page 46~ "Connecting to the network"
on page 46
P
V

P
V
:L)L
6ZLWFKHGRII
6ZLWFKHGRQ
'LVFRQQHFW
'HOHWHDOOQHWZRUNVHWWLQJVIURPWKH
DSSOLDQFH"
1H[W
'LVFDUG
Loading ...
Loading ...
Loading ...