Loading ...
Loading ...
Loading ...
HomeConnect en
41
3. Press Start / Reload repeatedly
until the display shows On .
a Wi-Fi is activated.
Note:If Wi-Fi is activated, the appli-
ance will not switch itself off automat-
ically.
Deactivating Wi-Fi on the appli-
ance
1. Press and hold Remote Start
for
at least threeseconds.
2. Set the programme to position 4.
a The display shows Con .
3. Press Start / Reload repeatedly
until the display shows OFF .
a Wi-Fi is deactivated.
Note:If Wi-Fi is switched off and your
appliance was previously connected
to your home network, this connec-
tion will be re-established automatic-
ally when Wi-Fi is switched back on.
Software update
Requirement:The display shows
Upd.
1. Press and hold Remote Start
for
approx. 3 seconds.
2. Set the programme to position6.
a UdP appears on the display.
3. Press Start / Reload
.
a The software update is installed.
a If End is shown on the display, the
software update is installed.
Note:The software update may take
several minutes. Do not switch off the
appliance while the software update
is in progress.
Resetting the appliance network
settings
1. Press and hold Remote Start
for
at least 3seconds.
2. Set the programme to position5.
a The display shows rES .
3. Press Start / Reload
.
a The display shows YES .
4. Press Start / Reload
.
a The network settings are reset.
a If End is shown on the display, the
network settings are reset.
Tip:If you wish to operate your appli-
ance again via the HomeConnect
app, you will need to reconnect it to
the Wi-Fi and to the HomeConnect
app.
Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the HomeCon-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip:For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com
Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the HomeConnect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
Loading ...
Loading ...
Loading ...