Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/42771684-wav28mh9gb-01/bg24.png)
en Basic operation
36
Starting the programme
Note:If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press Start / Reload
.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: End .
Soaking laundry
You can soak the laundry before
washing in the appliance by pausing
the programme.
Note:No additional detergent is re-
quired. The washing solution is then
used for washing.
1. Start the programme.
2. To pause the programme, after ap-
prox. 10 minutes, press Start / Re-
load
.
3. To resume the programme, after
the desired soaking time, press
Start / Reload
.
Adding laundry
Note:Please read the safety informa-
tion →Page4 to ensure that you use
the appliance safely.
1. Press Start / Reload
.
The appliance is paused and
checks whether it is possible to
add or remove laundry. Take note
of the programme status.
→"Display", Page20
2. Add or remove laundry.
3. Close the door.
4. Press Start / Reload
.
Cancelling the programme
Once the programme has started,
you can cancel it at any time.
Note:Please read the safety informa-
tion →Page4 to ensure that you use
the appliance safely.
1. Press Start / Reload
.
2. Open the door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse programme.
– If the water level is high: Start
the Spin or Drain programme.
3. Remove the laundry.
Resuming the programme when
the programme status is Rinse
Hold
1. Set the Spin or Drain pro-
gramme.
2. Press Start / Reload
.
Unloading the laundry
Note:Please read the safety informa-
tion →Page4 to ensure that you use
the appliance safely.
1. Open the door.
2. Remove the laundry.
Loading ...
Loading ...
Loading ...