Loading ...
Loading ...
Loading ...
DSP Implementation Guide
243
If you need to insert a plug-in on a multichannel (LCR to 7.1) input or bus, simply insert the m/m version
and MIO Console will instantiate the plug-in on every channel of the input or bus. The UIs will be linked;
adjustments you make will be applied to all channels of the plug-in. If you wish to adjust the plug-in on a
per-channel basis, you can:
• Use mono input channels instead of a multichannel source
• Insert a graph into the multichannel source or bus, and instantiate multiple plug-ins there
What's the difference between using a m/m vs. s/s plug-in on a stereo channel?
When you insert an m/m plug-in on a stereo channel, you are creating two separate mono signal paths.
For example, inserting an m/m compressor on a stereo input will create two plug-ins with each detector
fed from a single channel. The two channels will be processed independently. A stereo compressor
would feed the detector from both channels and process them together.
Graphs
A graph is a freeform area in which you can create your own DSP processing chains. To open a graph, select
the Graph option from the insert menu:
Figure 15.6: Selecting the Graph
and you will see this window:
Figure 15.7: The Graph Window
Loading ...
Loading ...
Loading ...