Loading ...
Loading ...
Loading ...
Evaporator
How to drain out the water from the internal tank and big water
reservoir completely
1.If the water separator pipe is blocked and there is no water flowing
down when you listen the compressor and the water pump inside are
still working, please turn off the unit first and disassemble this pipe
down, and clean it. Clean each hole on the pipe wall displayed in
following picture. After cleaning, install back the water separator pipe
and be sure the right terminal of the pipe connecting to the silicone pipe
well and as original.
2.For both of the water tank and the big water reservoir, clean them
with diluted detergent, warm water and a soft cloth. Then use the water
to rinse the inside, and drain out the water from the draining port by
unplugging the drain cap on the back. It will help you keep the unit and
ice-cube hygienic, and also make the unit work normally.
3.When cleaning, if find that the ice cube left on the evaporator and can
not be taken out easily, you can turn on the unit to let the unit enter the
ice making process, then press “ON/OFF” button for more than 5
seconds to let the unit start ice harvest process to melt the ice cube.It
will help you remove the hard ice cube.
Water Separator
Hole
08
EN
Loading ...
Loading ...
Loading ...