Loading ...
Loading ...
Loading ...
UNPACKING YOUR ICE MAKER
CONNECTING YOUR ICE MAKER
WARNING: fill with potable water only.
1.Ambient temp and ice making countdown symbol: when display show
<M>, ice making countdown,when display show <℉>,means ambient
temp.
2.Ice making and Ice harvest symbol: when the symbol is running, the
unit is making ice cube, when the symbol flash, the unit is ice harvest.
3.ON/OFF symbol.
4.Error code E1-Ambient temp senor breakdown.E2-refrigerating tube
sensor breakdown
5．Lack water warning symbol.
6.Ice full warning symbol.
7.Time setting display area. When show <H>, timer unit ON/OFF, when
show <M>,setting ice making time.
1.Remove the exterior and interior packaging. Check that ice basket and
ice scoop are included. If any parts are missing, please contact our
customer service.
2.Clean the interior with lukewarm water and a soft cloth. Take out the
ice basket and clean it
3.Find a location for your ice maker that is protected from direct
sunlight and other sources of heat (i.e.: stove, furnace, radiator). Place
the ice maker on a level surface. Make sure that there is at least 6
inches of space between the back and sides of your ice maker and the
wall.
4.Allow one hour for the refrigerant fluid to settle before plugging ice
maker in.
5.The appliance must be positioned so that the plug is accessible.
OPERATING PROCEDURES & MAINTENANCE
06
EN
Loading ...
Loading ...
Loading ...