Ancona AN-1419 User Manual

Loading ...

— 20 —

Troubleshooting

Problem Possible Cause

If the range hood or LED light

does not operate after installation:

Check if the range hood has been plugged in, make sure that all power

has been turned back ON, fused not blown and all electrical wiring are

properly connected.

The range hood vibrates when the

blower is on:

The range hood might not have been secured properly on to the ceiling.

The blower or fan seems weak: Checkthattheductsizedusedisatleast6in.(15.3cm)or31/4×10in.

(8.3 × 25.4 cm). Range hood WILL NOT function efciently with insufcient

ductsize.Forexample:7in.(17.7cm)ductover6in.(15.3cm)holeand

loosely secured.

Checkifductiscloggedorifdamperunit(half-circularange)isnot

installed correctly or opening properly. A tight mesh on a side wall cap unit

mightalsocauserestrictiontotheairow.

The lights work but the fan is not

spinning at all, is stuck or is rattling:

The fan might be jammed or scraping the bottom due to shipping damage.

Please contact us immediately.

The hood is not venting out

properly:

Make sure the distance between the stove top and the bottom of the hood

is within 24 in. and 30 in. (61 and 76.2 cm) in distance.

Reduce the number of elbows and length of duct work. Check if all joints

are properly connected, sealed, and taped.

Loading ...

Ancona AN-1419 Noturna IG 36 in. Island Glass Range Hood in Stainless Steel