Loading ...
Loading ...
Loading ...
— 14 —
STEP 10
Finishing Installation
Note: To avoid personal injury and/or damage to the range hood, this
installation step requires three people.
Installation
• Use 4 pieces ST4 × 8 mm mounting screws to attach the upper chimney into the hanging board and hold up the lower
chimney with the supplied `S` hook (see Figure 6).
• Use 4 pieces M4 × 25 mm mounting screws with washers to attach the glass into the hood (see Figure 7).
• Use 16 pieces M4 × 10 mm mounting screws to attach the hood into angle irons (see Figure 8).
• Attach the ducting pipe on the outlet (see Figure 9).
• After nishing all the above installation steps, remove the `S` hook and put down the lower chimney (see Figure 10).
Figure 8 Figure 9 Figure 10
Figure 7
.................
.................
Figure 6
.................
.................
Loading ...
Loading ...
Loading ...