Loading ...
Loading ...
Loading ...
7
ENGLISH
Storage
• Clean out the liquid lines as described in the CLEANING
MODEsection.
• Switch off theappliance.
Accessories
WARNING: Since accessories, other than those offered
by BLACK+DECKER, have not been tested with this
product, use of such accessories with this product
could be hazardous. To reduce the risk of injury, only
BLACK+DECKER recommended accessories should be
used with thisproduct.
Recommended accessories for use with your product
are available at extra cost from your local dealer or
authorized service center. If you need assistance in
locating any accessory, please contact BLACK+DECKER call
1-800-544-6986.
Cleaning Mode (Fig.E, I, L, M
It is recommended to clean the liquid lines of the cocktail
maker at least once amonth.
1. Remove the capsule20 from the capsule holder21.
Ensure the capsule cup23 remains inplace.
2. Place a large glass that holds at least 10oz (300 ml) on
the driptray3.
3. Remove the bottles as described in the REMOVING
BOTTLESsection.
4. Fill a glass with at least 2oz (60 ml) ofwater.
5. Place a straw7 in the glass and install the straw as
described in the INSTALLING BOTTLESsection.
6. Repeat steps 1‑ 5for allbottles.
7. Press the cleaning mode button28 for 6seconds.
8. Once the unit starts pumping water, let go of the
cleaning modebutton.
9. The bottle LEDs16 will light one at a time to indicate
which line is being cleaned. Once all LEDs turn on, the
process iscomplete.
10. Water may splash on the barcode scanner31. Use
a clean, dry towel to wipe the barcode scanner and
surroundingarea.
11. Install the bottles as described in the INSTALLING
BOTTLESsection.
inside the appliance; never immerse any part of the
appliance into aliquid.
CAUTION: Straws, bottle stoppers, capsule cup, drip
tray cover, and water bottle are top‑rack dishwasher
safe. It is recommended that you manually rinse the
attachments before placing them in thedishwasher.
• Clean the inside of the straws with warm water, mild
soap, and the provided straw cleaner30.
• Clean all external parts with a cloth dampened with warm
water and mildsoap.
• Remove the capsule cup23 by pulling it up and out of
the capsule holder21. To reinstall the cup, slide it into
the capsule holder and press down. Ensure the cup sits
fully and securely inside the capsuleholder.
Cleaning (Fig.C)
WARNING: Never use solvents or other harsh
chemicals for cleaning the non‑metallic parts of the
appliance. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid get
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and keep away from power
switch before making any adjustments or
removing/installing attachments or accessories.
An accidental start‑up can causeinjury.
Your BLACK+DECKER appliance has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper appliance care and regularcleaning.
Turn on Party Mode LEDs (Fig.K)
The bottle LEDs16 can be set to flash in a presetpattern.
1. Turn the cocktail maker on by pushing the "I" side of the
power switch14. All 6 bottle LEDs will light.
2. Press the party mode button 27 once to set party mode.
The LEDs will beginflashing.
3. Press the party mode button a second time to turn all
bottle LEDs off..
4. Press the party mode button a third time to turn all bottle
LEDs back on.
Pause Mode
Pause mode lasts for 2 minutes. The strength LEDs 15 will
light to indicate the time remaining.
3 solid, 1 flashing 1:30 ‑ 2 min. remaining
2 solid, 1 flashing 1 ‑ 1:30 min. remaining
1 solid, 1 flashing 30 sec. ‑ 1 minute remaining
1 flashing less than 30 sec.
• Press and hold the mix button for 3seconds to cancel
pausemode.
• If the LED countdown finishes before the drink mixing
resumes or pause mode is cancelled, the unit will pump
a small amount of water to flush the lines. The cocktail
maker will reset to its original mode and the drink will
no longer be mixed. If there is no water loaded into the
cocktail maker, the unit will flush the lines with air.
NOTE: The unit will not flush the lines while the capsule
holder lid 22 is lifted.
Pause mode is triggered threeways.
• The mix button ispressed.
‑Press the mix button once more toresume.
• The capsule holder lid isopen.
‑Close the lid and press the mixbutton.
• A bottle runs out of liquid
‑Replace the empty bottle as described in the BOTTLE
RUNS OUT DURING MIXINGsection.
Loading ...
Loading ...
Loading ...