Loading ...
Loading ...
Loading ...
Temperature Control
NOTE
Whilst hot water outlets are open ONLY the control used to set to delivery may be used to further
adjust it. Transfer of 'priority' between controllers is NOT possible until all hot water taps have
been closed. These are safety features.
NOTE
The temperature of outgoing hot water is constantly monitored by a built-in sensor. If the
will automatically go out. The ‘in use’ indicator will also go out. The burner will ignite again
once the outgoing hot water temperature falls to that shown on the digital monitor (or the pre-set
limit of the appliance)
*
heaters can be programmed to deliver higher temperatures from the master water controller,
or may be programmed to restrict the maximum available delivery temperature. Contact
Rinnai for more details.
**
temperature is available to outlets.
www.rinnai.com.au
•
REU-VCM2837FF/FFC FOUR
IMPORTANT
As REU-VCM2837FF/FFC
THREE, with the built-in controller acting
as a FOURTH controller.
•
IMPORTANT
controller, this is the default setting and can NOT be changed.
•
TWO
•
FOURTH MUST BE
Loading ...
Loading ...
Loading ...