Loading ...
Loading ...
Loading ...
Rinnai 16 HW_CF OIM
WARNING
MUST
ONLY.
Remove transit protection. Check for damage, if any is found DO NOT install and contact supplier.
REGULATIONS
This appliance must be installed in accordance with:
•
Current AS/NZS 3000, AS/NZS 3500 and AS/NZS 5601
•
Rinnai Installation Instructions
•
Plumbing Code of Australia (PCA)
•
Local regulations and municipal building codes including local OH&S requirements
APPLICABLE MODELS
the cover page of this manual.
APPLIANCE LOCATION
This appliance MUST BE
Rinnai for further information.
MUST BE provided adjacent to the appliance. For outdoor installations
MUST BE MUST BE
This appliance MUST BE
Refer to AS/NZS 5601 Section 6 for details.
All appliances MUST BE
means of scissor or boom lifts or other approved safe access equipment that is acceptable to local authorities.
This appliance
Models other than REU-VCM are suitable for installation locations up to 1000 metres above sea level and are
suitable for alpine areas.
REU-VCM models are suitable for installation locations higher than 1000 metres above sea level such as alpine
areas, refer to "Altitude Setting REU-VCM ONLY" on page 18 for further information.
Outdoor Models
This appliance is designed for ‘Outdoor’ Installation only. As such, it MUST BE located in an above ground open
MUST BE
Indoor Models
This appliance is designed for ‘Indoor’ installation only. It may be installed ‘Outdoors’ in an enclosure if the
GENERAL INSTALLATION INFORMATION
Loading ...
Loading ...
Loading ...