Loading ...
Loading ...
Loading ...
seconds. The effectiveness of vibration may vary based on
the dog's temperament and experience.
Intensity Levels
The Pro 550 Plus system provides 6 stimulation intensity levels,
which increase sequentially from 1 to 6. Within each intensity
level, you can select low, medium, and high stimulation using
the training keys (Training Key Functions, page 4).
Choosing the Correct Intensity Level
1
Set the intensity to the lowest level (Changing the Intensity
Level, page 4).
2
Select a training key.
3
Observe the dog for a reaction, such as a head shake, neck
movement, or just a change in expression.
Sometimes dogs will vocalize due to the surprise of the
electrical stimulation. If the dog vocalizes more than once,
the intensity level is too high for beginning training.
4
If there is no reaction, increase the intensity level by one level
until the dog has a slight but recognizable reaction to the
stimulation.
The intensity level that causes a slight but recognizable reaction
is your dog's baseline level for beginning collar training. You do
not need to, and should not, apply this intensity selection test
again.
After you begin training, the dog’s performance guides your
intensity selection. As the dog advances in training, you may
need to change the level depending upon the training situation.
Changing the Intensity Level
You can select a different intensity level for each dog collar
device.
1
Select a dog collar device (Selecting a Dog Collar Device,
page 3).
2
Adjust the dial to increase or decrease the intensity level.
Training Key Functions
The Pro 550 Plus system provides several training modes, which assign different combinations of momentary stimulation,
continuous stimulation, and tone to the training keys. The three vertical letters next to the mode toggle switch correspond to the
training key functions, from top to bottom.
Key Momentary (M) Accessory (A) Continuous (C)
Tone key Tone Tone Tone
Top training key Momentary stimulation or vibration (medium) Light on Continuous stimulation or vibration (medium)
Bottom training key Momentary stimulation or vibration (low) Light off Continuous stimulation or vibration (low)
Both training keys Momentary stimulation or vibration (high) Not Applicable Continuous stimulation or vibration (high)
Locking and Unlocking the Training Keys
You can lock the training keys to prevent inadvertent key
presses.
• To lock the keys, turn the intensity dial to N.
• To unlock the keys, turn the intensity dial to any other setting.
Using the Light
You can use the light feature on your device to verify pairing,
help locate your dog, and provide safety for your dog at night.
1
Select a dog collar device (Selecting a Dog Collar Device,
page 3).
2
Move the mode toggle switch to A.
3
Select the top training key to turn the light on.
4
Select the bottom training key to turn the light off.
Device Information
Support and Updates
• You can update software for your handheld device and mini
dog collar device using Garmin Express
™
.
• You can update software for your dog collar device using
Garmin
®
WebUpdater (PC only).
Product Updates
On your computer, install Garmin Express (www.garmin.com
/express).
This provides easy access to these services for Garmin devices:
• Software updates
• Product registration
Setting Up Garmin Express
1
Connect the device to your computer using a USB cable.
2
Go to garmin.com/express.
3
Follow the on-screen instructions.
Updating the Dog Collar Device Software
Before you can update the dog collar device software, you must
connect the dog collar device to a computer (Connecting the
Collar to a Computer, page 5).
NOTE: PC only. Updating the software does not erase any of
your data or settings.
1
Go to www.garmin.com/products/webupdater.
2
Follow the on-screen instructions.
Device Care
NOTICE
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Secure the weather cap tightly to prevent damage to the USB
port.
Cleaning the Device
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.
After cleaning, allow the device to dry completely.
Calibrating the Compass on the Handheld
Device
The device has a 3-axis electronic compass. You may need to
calibrate the compass after using the handheld device inside a
vehicle, exposing the handheld device to a magnet, or
experiencing temperature changes.
NOTICE
Calibrate the electronic compass outdoors. To improve heading
accuracy, do not stand near objects that influence magnetic
fields, such as vehicles, buildings, and overhead power lines.
4 Device Information
Loading ...
Loading ...
Loading ...