Loading ...
Loading ...
Loading ...
,_ WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to filter out microscopic particles.
SAVE THESE INSTRUCTIONS
Blade Diameter
Blade Arbor
Cutting Depth at 0° Bevel Cut
Cutting Depth at 45 ° Revel Cut
5-1/2 in. (140 mm)
3/8 in. (10 mm)
1-9/16 in. (40 mm)
1-1/8 in. (29 mm)
No Load Speed
Motor
Charge Rate
Charger Rating
4,000 RPM
18 Volts DC
1 Hour
120 volts, 60 Hz, AC
Your trim saw has been shipped completely
assembled except for the blade. Inspect it carefully to
make sure no breakage or damage has occurred
during shipping. Ifany parts are damaged or missing,
contact your nearest Sears Retail Store to obtain
replacement parts before attempting to operate saw. A
blade, blade wrench, rig guide and this owner's
manual are also included.
,_, WARNING: If any parts are missing, do not
operate this tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
The following recommended accessories are currently available at Sears Retail Stores.
• 5-1/2 in. Thin Kerr Blade
_ WARNING: The use of attachments or accessories not listed might be hazardous.
6
Loading ...
Loading ...
Loading ...