Loading ...
Loading ...
Loading ...
Configuring System Audio 63
7 Power on the first Stage I/O unit by pressing the power switch to the On position for the PSU that is plugged into an AC power
source. Stage 64: If both PSUs are connected for redundancy, power-on both PSUs. The power switch(es) lights green and the
following occurs on the front panel of the Stage 64:
• The
Status LED lights green.
• The AVID logo appears while the device initializes.
• When initialization is complete, the Controller Menu
HOME page is shown.
8 Power on any other Stage I/O units in the system.
9 Proceed to
Confirming System Components.
Powering Down the System
Power down the system in the following sequence:
1 Turn off the audio monitoring system.
2 Turn off any connected computers for recording/playback.
3 Shut down your system by doing the following:
• Put the system into Config mode (see Enabling Config Mode).
• On the external VENUE software screen, go to the Options page and select the System tab.
•Select Shut Down.
•Select Shut Down again to confirm.
4 When the MTS and the external screen go black, power off the S6L control surface using the back-panel power switch.
5 On the front panel of the E6L engine, once the Status LED is unlit and the System LED is lit amber you can power off the E6L
using the back-panel power switch.
6 Power off any connected Stage I/O units.
Controller Menu HOME page
You can also access system Shut Down on the MTS by tapping the Gear icon in the lower right corner.
HOME
<Stage 64> 96k
Net OK Mon On
HW OK MADI On
Loading ...
Loading ...
Loading ...