Loading ...
Loading ...
Loading ...
Hardware Inserts 374
Activating and Bypassing Hardware Inserts
You can toggle hardware inserts in/out on-screen, and from the control surface using Events.
To activate or bypass a hardware insert on-screen.
1 Go to the Inputs or Outputs page and select the channel where you want to activate or bypass the insert.
2 Click the In/Out button for the HW insert. The button lights when the insert is activated (in circuit).
You can also define an Event to toggle a hardware insert in/out via a Function or other hardware switch, a fader or other continuous
control, MIDI input, or a system value. For instructions on how to create and define Events, see Events.
Setting the Hardware Insert Location
You can choose the location of the hardware insert in the signal path relative to the four plug-in inserts on a per-channel basis.
To set the hardware insert location:
1 Go to the Inputs or Outputs page and select the channel where you want to set the hardware insert location.
2 In the Inserts section, select the hardware insert indicator in one of the five available locations so that it lights red.
Before activating a hardware insert, be sure that you have connected the external unit to your S6L system. If you activate the
hardware insert and audio on that channel is not present, double-check your cabling to make sure it is connected correctly.
Activating a hardware insert
Any HW inserts on MADI-192 cards are unavailable when VSC MADI is enabled. For details on configuring MADI Option
card inserts, see the
Using MADI for Hardware Inserts.
Hardware insert indicator showing the hardware insert before the first plug-in (left), and after the first plug-in (right)
Loading ...
Loading ...
Loading ...