Loading ...
Loading ...
Loading ...
Options 343
Meters Follow Selection (S6L-24C Only)
When the MTS is in Meters View it shows the channels on the faders directly below it
(OLEDs on those strips show a Selection outline). By default, Meters view on the 24C follows the Selected channel. You can
change this behavior to instead have the MTS Meters view be associated with whichever strips are banked below the MTS. This
setting is only available when using an S6L-24C control surface.
• When enabled, Meters View on the S6L-24C MTS associates with the bank of channels that has a channel selected locally.
• When not enabled, Meters View associates with the faders directly below the MTS.
Ethernet Control
Ethernet Control settings let you configure the following:
ECx Network Settings
These settings let you configure ECx Ethernet Control to remotely control of your system over a wired or
wireless Ethernet network. See the ECx Ethernet Control Guide for more information.
VENUE Link Settings
These settings let you configure VENUE Link to integrate a Pro Tools system with VENUE. For more in-
formation, see the S6L Live Recording Guide.pdf.
Metering
The following display options can be configured for meters. These options affect the 16 channel meters on the S6L control surface
and on-screen.
Meter Ballistics
This option lets you choose RMS or Peak ballistics for the control surface and on-screen meters.
RMS Ballistics
(Default) Meters follow the characteristics of a damped analog meter. In this mode, meter response and decay is
slower than in Peak mode, providing an average reading of the metered signal. A single LED shows the peak level for the desig-
nated Peak Hold Time.
Peak Ballistics
Meters follow the characteristics of a standard peak meter. In this mode, meter response is instantaneous, showing
the true peak level of the metered signal.
Metering Points
These options let you choose the point in the signal path where the signal is picked off for metering input and output channels.
Input Channels Metering Point
Choose one of the following options to set the input channel metering point:
• Top of Channel
•Insert Return
• Post-Fader (Post-Mute)
Output Channels Metering Point
Choose one of the following options to set the output channel metering point:
• Top of Channel
• Post-Fader (Post-Mute)
Meters Follow Selection setting in Options > Interaction on S6L-24C (only)
You can set Pro Tools metering to mirror VENUE metering.
Pro Tools Recording and Playback
Loading ...
Loading ...
Loading ...