Loading ...
Loading ...
Loading ...
Adjusting Channel Parameters 112
Using Gain Guess
The automated Gain Guess function can be used to set a nominal level for a channel based on its incoming signal. When you en-
abled Gain Guess, the system samples the incoming signal and automatically sets the channel Input Gain and pad for a 0 dB refer-
ence. Gain Guess follows the current Meter mode (Peak or RMS). You can access Gain Guess on the external screen.
To engage Gain Guess:
1 On the external screen, go to the Inputs page.
2 Attention a channel.
3 Touch and hold the Guess button. The button flashes to indicate level sampling.
4 Release the button. Input Gain will be set so the incoming signal reaches 0 dB peak (if Peak mode is selected) or 0 dB RMS (if
RMS mode is selected).
Setting Right Offset on Stereo Channels
On stereo input channels the Gain control affects both the left and right channels. The Right Offset feature lets you offset the gain
of the right channel relative to the left channel by –20 dB to +20 dB, within the overall gain limits. You can adjust Right Offset in
Channel Control and Channel Strip modes.
To adjust Right Offset in Channel Control mode:
1 Bank to the desired input channels, then do either of the following:
• Select a channel, and then press the INPUT Channel Control Function switch on the associated CKM.
• On the associated CTM, touch the Input touch zone for the desired channel.
2 Rotate the encoder under the display showing R. Offset.
To adjust Right Offset in Channel Strip mode:
1 Bank the desired input channels.
2 Enable Channel Strip mode on the CKMs by doing either of the following:
• Press a lit Select switch to enable Channel Strip mode on the associated CKM.
• Press Select Clear to de-select all channels on the control surface and enable Channel Strip mode on all CKMs.
3 If necessary, navigate to the first Channel Strip mode parameter bank by pressing any lit Left Parameter Bank switches until
Gain appears in the top row encoder displays.
4 In the column for the channel you want to adjust, press the encoder Sel switch under the display showing Gain. R. Offset is now
shown in the display, and the encoder targets the Right Offset parameter.
5 Rotate the encoder under the display showing R. Offset to adjust the Right Offset. The gain value in the display changes as you
adjust the parameter.
Gain Guess engaged
Loading ...
Loading ...
Loading ...