Loading ...
Loading ...
Loading ...
DGX-670 Owner’s Manual
93
9
Connections – Using Your Instrument with Other Devices –
NOTE
• When using a USB cable to connect the instrument to your computer, make the connection directly without passing through a USB hub.
• The instrument will begin transmission a short time after the USB connection is made.
Transmitting/Receiving Audio Data (USB Audio Interface function)
By connecting a computer or a smart device to the [USB TO HOST] terminal via a USB cable, digital audio
data can be transmitted/received. This USB Audio Interface function provides the following advantages:
Playing back audio data with high sound quality
This gives you direct, clear sound in which the sound quality has less noise and deterioration than that
from the [AUX IN] jack
Recording your performance on the instrument as audio data by using recording software
or music production software
The recorded audio data can be played back on the computer or smart device.
NOTE
• When transmitting or receiving audio signals by using a computer running Windows, the Yamaha Steinberg USB Driver should be
installed to the computer. For details, refer to the “Computer-related Operations” on the website.
• For instructions on connecting to a smart device, refer to the “Smart Device Connection Manual” on the website.
Turning Audio Loopback On/Off
This allows you to set whether Audio Input Sound (page 95) from the external device is output to a
computer or a smart device or not along with the performance played on the instrument. To output the
Audio Input Sound, set the Audio Loopback to on.
For example, if you want to record the Audio Input Sound as well as the sound played on the instrument by
using the connected computer or smart device, set this to on. If you intend to record only the sound played
on the instrument by using the computer or smart device, set this to off.
The setting can be made via [MENU] → Cursor buttons [
U][D][L][R] Utility, [ENTER] → TAB [L]
Config1 → Cursor buttons [U][D] 2 Audio Loopback.
NOTE
• When recording by using the USB Audio Recorder function (page 75), the Audio Input Sound from the external device is recorded
when this is set to On, and not recorded when set to Off.
• The sound cannot be output to a device connected by the [AUX IN] jack or Bluetooth.
Instrument
USB cable
USB conversion
adaptor
Smart device
Computer
USB terminalInstrument
USB cable
Loading ...
Loading ...
Loading ...