Loading ...
Loading ...
Loading ...
14
LAUNCH CRP 429C User's Manual
5. Diagnose
5.1 Connection
1. Turn the ignition off.
2. Locate vehicle’s DLC socket: It provides standard 16 pins and is generally
located on driver’s side, about 12 inches away from the center of dashboard.
See Figure 2-2. If DLC is not equipped under dashboard, a label indicating
its position will be given. In case no DLC is found, please refer to Automobile
Repair Manual.
3. Plug one end of the diagnostic cable into the DB-15 connector of CRP 429C,
and tighten the captive screws. Connect the other end to the vehicle’s DLC.
Diagnostic Cable
CRP 429C
Vehicle's DLC
Figure 5-1
5.2 System Diagnosing
This function is specially designed to diagnose the 4 basic systems of ABS,
SRS, ENG and AT system.
5.2.1 Smart Diagnosis (Auto-Detect)
After connection, turn the ignition key on and the system enters auto-detect
Loading ...
Loading ...
Loading ...