Loading ...
Loading ...
Loading ...
$ERXW<RXU&DPHUD
water. Immerse the camera in a shallow basin filled with fresh water for
10 minutes.
2.
Immerse the camera in fresh water and shake it sufficiently in the water
to remove any foreign substances from the camera.
3.
When the cameras is immersed in the water, a few air bubbles may
come out from the water drain holes of the camera such as openings in
the microphone or speakers. This is not a malfunction.
4.
Wipe off water droplets with soft cloth and dry the camera in a well-
ventilated and shady place.
5.
Place the camera on a dry cloth to dry it.
6.
Do not dry the camera with hot air from a hair dryer or clothes dryer.
7.
After making sure that there are no water droplets on the camera, open
the battery cover and use a soft dry cloth to gently wipe off any water
or sand remaining on the waterproof packing or inside the camera.
x If the cover is closed when the inside is wet, this could cause
condensation or a malfunction.
Cleaning After Using the Camera in Conditions Other than Underwater
Use a blower to remove any dust or lint that adheres to the lens, monitor or
camera body. To remove fingerprints or other stains that cannot be removed
with a blower, gently wipe the parts with a soft dry cloth. If you wipe with too
much pressure or with a rough cloth, it may damage the camera or cause a
malfunction.
Storage
If you do not intend to use the camera for an extended period, remove the
battery and avoid storing the camera in any of the following types of locations:
x Places that are poorly ventilated or subject to humidity of over 60%
x Place exposed to temperatures above 50°C (122°F) or below -10°C (14°F).
x Place next to equipment that produces strong electromagnetic field, such
as television or radios.
To prevent mold or mildew, take the camera out of storage at least once a
month, and turn it on and release the shutter a few times before putting it away
again.
Loading ...
Loading ...
Loading ...