Ancona GCP430 User Manual & Installation Instructions

Loading ...

— 16 —

Operation

Power Settings

Press the button once and the motor starts to

operate at Low speed.

Press the button and the motor will reach Medium

speed.

Press the button the motor will reach High speed.

Lights

Press the light button

to turn LED lights on

and off.

Low

Speed

Medium

Speed

Light

High

Speed

Troubleshooting

Problem Possible Cause

If the range hood or LED light

does not operate after installation:

Check if the range hood has been plugged in, make sure that all power

has been turned back ON, fused not blown and all electrical wiring are

properly connected.

The range hood vibrates when the

blower is on:

The range hood might not have been secured properly on to the ceiling or

wall.

The blower or fan seems weak:

Checkthattheductsizedusedisatleast6in.(15.2cm)or31/4x10in.

(25.4 x 8.3 cm). Range hood WILL NOT function efciently with insufcient

ductsize.Forexample:7in.(17.7cm)ductover6in.(15.2cm)holeand

loosely secured.

Checkifductiscloggedorifdamperunit(half-circularange)isnot

installed correctly or opening properly. A tight mesh on a side wall cap unit

mightalsocauserestrictiontotheairow.

The lights work but the fan is not

spinning at all, is stuck or is rattling:

The fan might be jammed or scraping the bottom due to shipping damage.

Please contact us immediately.

The hood is not venting out

properly:

Make sure the distance between the stove top and the bottom of the hood

is within 24 in. and 30 in. (61 and 76.2 cm) in distance.

Reduce the number of elbows and length of duct work. Check if all joints

are properly connected, sealed, and taped.

Loading ...

Ancona GCP430 30 in. Wall Mounted Range Hood with a Stainless Steel Body and Glass Canopy

User Manual & Installation Instructions - Page 16