Ancona GCP430 User Manual & Installation Instructions

Loading ...

— 13 —

STEP 12

Connect Ductwork

• Attach ductwork to damper. Secure the ductwork with duct tape to make sure joints are secure and air- tight.

• Donotinstalltheducttapetootightlyasthismaypreventthedamperapsfromopeningwhichwilloverworkthemotor

and cause improper functioning of the unit.

• Fasten all connections with sheet metal screws and tape all joints with certied aluminum or foil tape. Use caulking to

seal exterior wall or roof opening around the cap.

Fig #1

STEP 10

Installing the Damper

• Fix the damper on the top vent of hood with four screws E. (See Figure # 3)

• If ventilation system is equipped with an external air duct with a different

diameter, apply a reduction tting. However, for maximum performance

and safety, a 6 in. round ducting is recommended.

Fig #3

STEP 11

Mount Range Hood onto Wall

• Hang the range hood on the hooks of the lower mounting bracket. (See Figure # 4)

• Screw the range hood to the wall. (See Figure # 5)

CAUTION - Make certain the range hood is secure before releasing!

Fig #5Fig #4

Installation

Loading ...

Ancona GCP430 30 in. Wall Mounted Range Hood with a Stainless Steel Body and Glass Canopy