Ancona GCP430 User Manual & Installation Instructions

Loading ...

— 15 —

Installation

STEP 15

Install Filters

To install lters for the following three steps (See Figure # 8):

• Angle the lter into slots at the left side of the hood.

• Push the button on handle of the lter.

• Release the handle once the lter ts into a resting position.

Cleaning Filters

IMPORTANT: Drain oil from bafes, spacers, lters, oil tunnels, oil containers before oil and residue overow!

• Removeallbafes,spacers,lters,greasetray,andoilcontainersanddiscardoilandresidue.

• Washwithwarmsoapywater.NOTE:Stainlesssteelbafes,spacersandoiltunnelaretoprackdishwashersafe.

• Dry thoroughly before replacing and follow directions for installation in reverse.

• Filters should be cleaned after every 30 hours of use.

• Should lters wear out due to age and prolonged use, replace with a new lter.

Fig #8

Loading ...

Ancona GCP430 30 in. Wall Mounted Range Hood with a Stainless Steel Body and Glass Canopy