Loading ...
Loading ...
Loading ...
P a g e |
26
web: brohn.com.au
○ Cable type: H05 RRF 3 core x 0.75 mm³ (Type RR-F <HAR> marked).
○ The mains supply cable and plug are supplied with this product.
REPLACING THE MAINS SUPPLY CABLE
If the mains supply cable is damaged, then it must be replaced by a licensed electrician
and at appropriate replacement.
The mains supply cable should be replaced in accordance with the following instructions:
○ Switch the appliance off at your mains supply.
○
Open the box of the supply board.
○
Unscrew the clamp fixing the cable.
○ Replace the cable with one of the same length and in accordance with the
specification given above.
○
The “green-yellow” earth wire must be connected to the earth terminal marked “E”.
It must be about 10 mm longer than the live and neutral wires.
○ The neutral wire must be connected to the terminal marked with letter (N). The live
wire must be connected to the terminal marked with letter (L).
INSTALLATION SUMMARY WARNINGS
Do not modify this appliance.
This appliance must be installed by an authorised installer, licensed gas fitter.
Prior to the installation ensure that the local distribution conditions (nature of the gas
and gas pressure) and the adjustment of the appliance are compatible.
The adjustment conditions for this appliance are stated on the label.
This appliance is not connected to a combustion products evacuation device. It
should be installed and connected in accordance with current installation
regulations. Particular attention should be given to the relevant requirements
regarding ventilation.
Before installing, turn off the gas and electricity supply to the appliance.
All appliances containing any electrical components must be earthed.
Ensure that the gas pipe and electrical cable are installed in such a way that they
do not touch any parts of the appliance which may become hot.
Gas pipe or connector hose should not be bent or blocked by any other
appliances.
Check the dimensions of the appliance as well as the dimensions of the gap to be
cut in the kitchen unit.
The panels located above the work surface, directly next to the appliance, must be
made of non-flammable material. Sealing materials should be heat resistant to
prevent deterioration.
Turn on the appliance supply gas tap and light each burner. Check for a clear blue
flame without yellow tipping.
If burners show any abnormalities check the following:
Loading ...
Loading ...