Loading ...
Loading ...
Loading ...
P a g e |
19
web: brohn.com.au
400 mm between the hob surface, providing that the underside of the horizontal
surface is in line with the outer edge of the hob. If the underside of the horizontal
surface is lower than 400 mm, then it must be at least 50 mm away from the outer
edges of the hob.
50 mm clearance around the appliance and between the hob surface and any
combustible materials.
ALL MODELS
IMPORTANT: You must have a gap of
at least 25 mm between the
underneath of the appliance and any
surface that is below it.
Carefully turn the hob upside down
and place it on a cushioned mat.
Apply the sealing strip (A) provided
around the edge of the appliance.
The protective covering must be
removed from all sides.
Do not leave gaps in the sealing agent or overlap it creating uneven thickness.
NOTE: It will be difficult to remove the hob from the benchtop in case when needed, if a
silicon sealant used to seal the appliance to the benchtop.
(A) Sealing strip
(B) Clamp
(C) Screw
Loading ...
Loading ...
Loading ...