Loading ...
Loading ...
Loading ...
P a g e |
21
web: brohn.com.au
This hob is not fitted with a device for discharging the products of combustion.
Ensure that the ventilation rules and regulations are followed.
The walls behind and near the hob should be resistant to heat, steam and
condensation.
Remember that the quantity of air necessary for combustion must never be less
than 2m³/h for each kW of power (see total power in kW on the appliance rating
plate).
DUAL GAS REGULATOR VALVE INTRODUCTION
Product features:
This product has a low-pressure pipeline regulator valve built-in voltage regulator for
gas products.
Natural gas and liquefied petroleum gas conversion function needs to be set
manually.
Operating Temperature: -20℃~60℃.
Inlet pressure setting: of natural gas 6 in.wc / liquefied gas 11 in.wc of.
The performance parameters of the following table:
INSTALLATION METHOD:
When joining, use an adequate amount of sealant paste on external threads or
choose other appropriate sealing methods.
Out of gas regulator valve thread must match the connecting thread with the gas
supply.
Regulator valve installation location must be perpendicular to the gas line.
After installation, open the gas source switch and check valve body with the gas
leak test kit or soap and water for leaks.
Loading ...
Loading ...
Loading ...