Loading ...
Loading ...
Loading ...
7
10
• Position the steam wand in “A” (autosteaming) position.
Turn the steam lever (A4) in position
(g. 11).
11
• The indicator light blinks. The machine proceeds to
make the froth and delivery is interrupted automatically.
Remove with a soft damp cloth any milk residues from the
steam wand. Put the steam wand to “OFF” position after
each use.
4.2 Manual steaming:
• Fill a milk jug (A17) with fresh cold milk (between the min
and max positionl). Milk will up to triple in volume. For a
denser more even froth, you must use milk at refrigerator
temperature (about 5°C).
•
To make the froth manually, place the steam wand in “M“
(manual steaming) position, place the milk jug under the ste-
am wand and turn the steam lever in position
(g. 12).
12
• To froth the milk, rest the steam wand on the surface of the
liquid. This mixes air with the milk and steam.
Keep the steam wand in contact with the surface, taking
care not to let in too much air and create excessively large
bubbles.
Immerse the steam wand below the surface of the milk,
this creates a vortex in the liquid.
• Once the milk is heated to the desired temperature, turn
again the steam lever in position.
• Wait until steam stops completely before removing the
milk jug.
Put the steam wand to “OFF” position after each use to start
the automatic rinsing.
Barista tips: Fresh milk is best. Always use fresh milk straight
from the fridge.
For best results, always replace the milk jug in the fridge when
not in use.
Whole milk ensures optimum results. The appearance and tex-
ture of froth depending on the nature of the dairy milk or vege-
table beverages utilized.
After frothing the milk, eliminate unwanted bubbles by swirling
the jug gently.
Please note: During normal operation of the machine, some
water is discharged in the drip tray to ensure optimal perfor-
mance.
After every use, remove with a soft damp cloth any milk residues
from the steam wand and place it in “OFF” (auto clean) position.
The appliance delivers water from the steam wand.
A rinse is performed automatically when the appliance switches
o if the steam wand remains in “A” (autosteaming) position.
5. MENÙ SETTINGS
Press and hold the
(B1) and (B4) buttons for 3 seconds
to enter the menù settings. After few seconds of inactivity, the
machine automatically exits the menu.
The (B2) and (B3) indicator lights blinks.
The following settings will be saved after few seconds, when
appliance exit automatically by menu setting.
5.1 Delay time between pre-infusion and infusion
To set the delay time, press
(B1) button:
No preinfusion delay
1 second
2 seconds
5.2 Descale
To set descale function, press (B6) button; the (B3) in-
dicator light blinks and the indicator light turns on. Press
Loading ...
Loading ...
Loading ...