Loading ...
Loading ...
Loading ...
4,Moving Refrigerator Handle
• Remove caps (8) and (9)
• Pull cover (5) downward end take it off
• Loosen 3 screws (6) (two on the top and one on the
center), take off handle (7) and attach it on the right
• Attach the cover (5) by pushing it up
• Take off cap (10) and attach it on the fight
• Attach the removed caps (8) and (9) on the left side
5. Attaching Refrigerator Door
• Attach the base gritfe (f)
• Remove screw (2) from teft side to right side.
- Attach the door (3) to the bottom hinge pin.
• Attach the middle hinge (4) on the opposite side with the
3 bolts and Phillips screw (5)
6. Attaching Freezer Door
. Place the door (8) onto the middle
hinge pin (7)
• Attach the top hinge (t0) with 3 screws
• Reinstall top hinge cover (11)
7. After Completing the Job
= Make sure that the four corners of the door gasket are
not folded over. Toensure a good seal, apply a small
amount of silicon grease on the corner gaskets
Loading ...
Loading ...
Loading ...