Loading ...
Loading ...
Loading ...
Explosion Hazard
Use non-flammable cleaner.
Failure to do so can result in death, explosion or fire
Both the refrigerator and freezer sections defrost
automatically However, clean both sections about once
a month to prevent odors Wipe up spills immediately
GENERAL CLEANING TIPS
• Unplug refrigerator or disconnect powe[,
• Remove all removable parts, such as shelves,
crispers, etc
,,Use a clean sponge or soft cloth and a mild detergent in
warm water Do not use abrasive or harsh cleaners
,,Hand wash, rinse and dry all surfaces thoroughly.
• Plug in refrigerator or reconnect power,
OUTSIDE
Waxing extema/painted metal sUrfaces helps provide rus!
protection. Do not wax plastic parts Wax painted metal
surfaces at least twice a year using appliance wax (or
auto paste wax) Apply wax with a cIean, soft. c!oth
For products with a stainless steel exterior, use a clean
sponge or soft cloth and a mild detergent in warm water.
Do not use abrasive or harsh cleaners Dry thoroughly
with a soft cloth.
INSIDE WALLS (allow freezer to warm up so
cloth won't stick)
Tohelp remove odors, you can wash the inside of the
refrigerator with a mixture of baking soda and warm water
Mix 2 tablespoons baking soda to 1 quart of water (26 g
soda to 1 liter water.) Be sure the baking soda is
completely dissolved so does it not scratch the surfaces
of the refrigeratott
DOOR LINERS AND GASKETS
Do not use cleaning waxes, concentrated detergents,
bleaches or cleaners containing petroleum on plastic
parts
PLASTIC PARTS (covers and panels)
Do not use paper towels, window sprays, abrasive
cleansers or flammable fluids These can scratch or
damage the maleriat
CONDENSER COILS
Remove base grille (See the base grille section on
page 7 )
Use a vacuum cleaner with an extended attachment to
clean condenser coils
Vacuum coils when dusty or dirty Coils may need to be
cleaned as often as every other month.
Replace base grille
LIGHT BULB REPLACEMENT
Electrical Shock Hazard
Before replacing a burned-out light bulb, either unplug
the refrigerator or turn off power at the circuit breaker
or fuse box
NOTE: Moving the controt to the OFF position
does not remove power to the light circuit
NOTE: Not all appliance bulbs will fit your refrigerator, Be
sure to reptace the bulb with one of the same size, shape
and wattage,,
Tochange the refrigerator light:
t° Unplug the power cord from the outlet
2, Remove refrigerator shelves
3. For each hold cover and press front tab while pulling
shield down to remove it
4. Turn the bulb counterclockwise and remove
5. Repface a humeri-out light bulb with a new bulb, turning
it clockwise
6. Replace the lightshield pushing it up
7. Replace the refrigerator shelves
80Plug the power cord to the oulet
19
Loading ...
Loading ...
Loading ...