Loading ...
Loading ...
Loading ...
CRISPER COVER WITH LATTICE ON INNER
SURFACE
To remove the crisper cover;
1. Remove both crisper drawers
2, Whiie holdingthe crispercover support (2), pull the cover
up and out (1),
WARNING: Be careful when handing glass cover since
glass is not attached to cover
To remove lattice on inner surface
DOOR RACKS
The door racks may be removed for easier cleaning
Snap-On Door Racks
To remove the racks:
1, Remove all items in the door racks
2, Push the rack away from the inside wall of the door (A)
and ii_ up the door rack (B)
To replace the racks:
1. Hotd either end of the door rack against the inside walt
of the door
2. Push down the rack end until it locks in place
1,,Remove Crispercover (as illustrated above)
2 Hold the glass cover and overturn crisper cover
3. For each lattice hold lattice and pull sides of the cover
outward to remove lattice,
To replace lattice on inner surface,:
1 For each lattice insert middle tab in 1
(closest to glass cover) and pull sides of the cover to
insert lattice
MODULAR DOOR BINS
1.8ins can be moved side to side by sliding right or left
2. To remove the bin, lift until bin up bottom of bin unclicks
and puit straight out
3. To replace the bin, slide it in above the desired
support slot and _ push down until it locks in place
WARNING: Be sure to clicks bottom portion of bin
otherwise, bins may fall
NOTE: Do not adjust a bin that is loaded with food
16
Loading ...
Loading ...
Loading ...