Loading ...
Loading ...
Loading ...
PAGE: 8 / 10
Attach the glass shade onto the glass holder,
repeat until all of glass shades are fixed.
Install LED bulbs (included). See relamping
label at socket area or packaging for
maximum allowed wattage.
The slide switch on switch box sets direction of fan rotation. Select the
desired direction of fan rotation.
Push the slide switch down for "Forward" and up for "Reverse".
Note: Wait for fan to stop before reversing the direction of blade rotation.
Install two pull chains and drops onto the pull chains located in the switch
box and light kit.
The pull chain controls the fan speed as follows:
1 pull – High, 2 pull – Medium, 3 pull – Low, and 4 pull – Off.
To turn the light kit “ON” or “OFF”, pull the chain that is attached to the
light kit.
Caution: 1. If you install a remote control or a wall control for this fan,
pull the pull chains to "high speed" of the fan motor and
"on" of the fan light.
2. Compatible Wall Switches:
Menards SKU# 363-2615 / 363-5815.
Fig.19
Turn ON the electric power at the
main fuse or circuit breaker box.
Fig.18
Install pull
chains and
drops
Slide Switch
Forward
Switch Box
Reverse
Make wire connection:
-- Connect the blue wire from
the switch box to black wire
from the fan light with wire
connector.
-- Connect the white wire from
the switch box to white wire
from the fan light with wire
connector.
Fig.17
Glass Shade
Glass Holder
3-5W E12 Base ST15 Type LED
Bulbs (included)
E12 Base ST15 Type
bulbs Max.60W
Fan Light
Wire Connector
Fig.15
Switch Box
Fig.16
Light Kit Switch
Set Screw
Fan Light
Remove the switch box screws from the switch box
cover first. Carefully put the wires into the switch box,
then attach the fan light into the switch box with the
switch box screws.
230208
Loading ...
Loading ...