Loading ...
Loading ...
Loading ...
Thread the motor wires through the
downrod stand cover, canopy cover
(Making sure the smooth side of
canopy cover is facing downward.)
canopy and downrod.
PAGE: 5 / 10
Installation Steps :
Hanger Pin
Downrod
Lock Pin
INSTALLATION INSTRUCTIONS
IMPORTANT:
NOTE: The fan weight is 19.18 lbs (8.7 kgs). Be sure the outlet box you are using is securely attached to the building
structure and can support the full weight of the fan. Failing to do so can result in serious injury.
Tighten the hanger bracket to the outlet
box with two mounting screws. (To reduce
the risk of fire, electric shock, or personal
injury, mount to an outlet box marked
"Acceptable for fan support" and use
mounting screws provided with the outlet
box.)
Note: For sloped ceiling installation, make
sure that the chip of the hanger bracket
is toward the floor.
Hang the fan on hanger bracket,
and make sure the slot of hanger
ball is snapped into the chip of
hanger bracket exactly.
Note: For sloped ceiling installation,
make sure the slot of hanger ball
and the chip of hanger bracket
face down.
Turn OFF the electric circuit at the
main fuse or circuit breaker box.
Tighten the two collar screws.
Slide lock pin into hanger pin
until it is locked into position.
Loosen the collar screws out part way.
Insert the downrod into the collar.
Slide hanger pin through holes of
collar and downrod.
Lock Pin
Collar Screws
Slot
Chip
Hanger Bracket
BEFORE YOU BEGIN INSTALLATION, CAREFULLY READ ALL INFORMATION PROVIDED IN THE SAFETY
INSTRUCTIONS AND INSTALLATION INSTRUCTIONS. IF IN DOUBT, CONSULT A QUALIFIED
ELECTRICIAN.
SAVE ALL INSTRUCTIONS.
Hanger
Bracket
Outlet Box
Chip
Hanger Pin
Collar
Downrod
Canopy
Motor Wires
Downrod Stand
Canopy Cover
Cover
Downrod
Canopy
Motor Wires
Downrod Stand
Canopy Cover
Cover
Remove the lock pin from hanger
pin and remove the hanger pin
from the downrod.
Fig.1
Fig.2
Fig.3
Fig.4 Fig.5
Fig.6
Fig.7
230208
Loading ...
Loading ...
Loading ...