Loading ...
Loading ...
Loading ...
English 13
Microwave oven use
Setting the time
When power is supplied, “88:88” and then “12:00” is automatically displayed on
the display. Please set the current time. The time can be displayed in either the 24-
hour or 12-hour clock. You must set the clock:
• When you rst install your microwave oven
• After a power failure
NOTE
You must manually change the time to apply daylight saving time.
1
1. Press OK.
3
4
2
2. Press < or > (Decrease/Increase) to
select 24-hour or 12-hour clock, and
then press OK.
3. Press < or > (Decrease/Increase) to set
the hour, and then press OK.
4. Press < or > (Decrease/Increase) to set
the minute, and then press OK.
NOTE
The control panel display shows the time when the microwave is not in use.
Setting the energy save mode
The microwave oven has an energy save mode.
• Press STOP/Eco. The control panel
display turns off.
• To cancel the energy save mode, open
the door or press STOP/Eco. The control
panel display shows the current time.
NOTE
Auto energy saving function
The product returns to standby status if there is no input for 25 minutes in the
middle of setting or while the operation has been paused. Also, if you leave the
door open, the interior lamp automatically turns off after 5 minutes.
Power levels and time variations
The power level function enables you to adapt the amount of energy dissipated
and thus the time required to cook or reheat your food, according to its type and
quantity. You can choose between six power levels.
Power level Percentage Output
HIGH 100 % 750 W
MEDIUM HIGH 75 % 600 W
MEDIUM 56 % 450 W
MEDIUM LOW 38 % 300 W
DEFROST 23 % 180 W
LOW 13 % 100 W
The cooking times given in recipes and in this booklet correspond to the specic
power level indicated.
• The cooking time decreases If you select a higher power level.
• The cooking time increases If you select a lower power level.
MS23T5018A_TC_DE68-04595N-00_EN.indd 13MS23T5018A_TC_DE68-04595N-00_EN.indd 13 21/5/2021 5:54:33 PM21/5/2021 5:54:33 PM
Loading ...
Loading ...
Loading ...