Loading ...
Loading ...
Loading ...
ENGLISH
14
2. Press the Start/Pause for more than 3 seconds, the machine will be in stand by state.
3. Press a new program button to select the desired program.
4. Press the Start/Pause button, then the dishwasher will start.
NOTE: If you open the door during washing, the machine will pause. When you and
press the Start/Pause Button, the machine will keep on working after 10 seconds.
FORGET TO ADD A DISH?
A forgotten dish can be added any time before the detergent cup opens.
1. Press the Start/Pause button to stop the washing.
2. After the spray arms stop working you can open the door completely.
3. Add forgotten dishes.
4. Close the door.
5. Press the Start/Pause button, the dishwasher will run.
AT THE END OF THE WASH CYCLE
When the working cycle has nished, the buzzer of dishwasher will sound 8
seconds, then stop. Turn o the appliance using the power button, shut o the
water supply and open the door of the dishwasher. Wait a few minutes before
unloading the dishwasher to avoid handling the dishes and utensils while they
are still hot and more susceptible to breakage. They will also dry better.
NOTE: The housing may still be warm once nished. Wait
a couple of minutes to start unloading.
Switch o the dishwasher:
1. Switch o the dishwasher by pressing the power button.
2. Turn o the water tap!
Open the door carefully:
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to
cool down around 15 minutes before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing
the dishes. In this way they will be cooler and the drying will be improved.
Unloading the dishwasher:
It is normal that the dishwasher is wet inside.
FORCED DRAINAGE OPERATION:
In standby mode, press FRUIT + RAPID for 3 seconds.
Loading ...
Loading ...
Loading ...